Requirements
The charger's serial number
Internet connection for the charger
Good to know: i-Charging Blueberry chargers are commissioned by trained professionals. i-Charging support sets the backend for you, remotely if needed.
Connect your charger
Contact i-Charging support: [email protected] or +351 221 150 960.
Ask them to set the backend URL to ws://proxy.plugchoice.com/v1.
Pass them the serial number to use as the chargepoint ID.
Keep the charger online so the settings can be applied.
Wait for i-Charging's confirmation.
Once confirmed, the charger connects to Plugchoice.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For i-Charging, this is the serial number (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The charger connects only after i-Charging confirms the backend change.
The chargepoint ID in Plugchoice must exactly match the ID set by i-Charging.
Check the charger has an internet connection.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.