Requirements
H-Series: a phone with the Hcharger app and Bluetooth
S-Series: a phone or laptop with wifi
The charger's serial number (on the commissioning label or device info)
Connect your charger
Option 1: H-Series
Download the Hcharger app (Google Play or App Store).
Connect to the charger via Bluetooth.
Go to the OCPP settings.
In OCPP server address, enter:
ws://proxy.plugchoice.com/v1Set EV charger identification code to the serial number.
Go to the networking settings.
Set up wifi, 4G/5G (enter your SIM's APN), or ethernet.
Click Confirm and wait for the charger to reboot.
Option 2: S-Series
On your phone or laptop, open the wifi settings.
Select the network named after the charger's serial number.
The wifi password is the same as the network name.
The web interface opens automatically. If not, browse to
192.168.1.1.Enter the password
123456.Click OCPP setup.
In OCPP URL, enter:
ws://proxy.plugchoice.com/v1Set CPID to the serial number.
Select network setup and set up wifi, 4G (enter your SIM's APN), or ethernet.
Reboot the charger.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For LCTC, this is the charger's serial number (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The chargepoint ID in Plugchoice must exactly match the serial number.
Check the identification code (H-Series) or CPID (S-Series) for typos.
Using a SIM? Check the APN settings and the signal.
Reboot the charger after changing settings.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.