Requirements
A laptop and an RJ45 (ethernet) cable
The charger's serial number
Web interface login: adm / floox
Connect your charger
Connect the RJ45 cable between your laptop and a free LAN port on the charger's router.
Give your laptop a static IP: 192.168.0.101, mask 255.255.255.0, gateway 192.168.0.1.
Do not use 192.168.0.1 or 192.168.0.100; these are reserved.
Browse to 192.168.0.100.
Log in as adm with password floox and press Submit.
Select Configuration.
Set OCPP Server to ws://proxy.plugchoice.com/v1.
Set ChargeBoxID to the charger's serial number.
Press Save and restart.
The charger now connects to Plugchoice. This can take a minute.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For Floox, this is the ChargeBoxID you entered, the serial number (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The chargepoint ID in Plugchoice must exactly match the ChargeBoxID.
Check the OCPP Server URL for typos or spaces.
Check the charger has an internet connection.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.