Requirements
The NRGkick app and a phone with Bluetooth on
Internet connection for the NRGkick (wifi or internal SIM)
A card UID added to your Plugchoice location
Connect your charger
Plug the NRGkick into a socket to turn it on.
Open the NRGkick app and pair via Bluetooth.
The access code is the last seven digits of the serial number.
Create an NRGkick cloud account and link the NRGkick to it.
Go to the Extended > Charging Network menu.
Select Custom.
Enter the URL
ws://proxy.plugchoice.com/v1.Enter the serial number as the chargepoint identifier.
Enter your card UID as the user tag identifier.
Turn on Configuration active and save.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For NRGkick, this is the chargepoint identifier from the app (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The chargepoint ID must exactly match the chargepoint identifier.
Check Configuration active is turned on.
The user tag identifier must match a card in your location.
Check the NRGkick has an internet connection, not just Bluetooth.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.