Skip to main content

How to connect: Anyos

Connect an Anyos charger to Plugchoice via the ANYOS Hypervision portal.

Requirements

  • Charger powered on and online (LAN or 4G)

  • Login for the ANYOS Hypervision portal (from ANYOS support)

  • The charger's serial number

Connect your charger

  1. Log into the ANYOS Hypervision portal.

ANYOS Hypervision portal login page

  1. Find your charger in the list by its serial number.

ANYOS Hypervision station list with serial numbers and status

  1. Press the pencil to open the configuration menu.

ANYOS station configuration form with OCPP ID and the Plugchoice URL filled

  1. Set the authentication mode to RFID ON - OCPP.

ANYOS authentication mode dropdown with RFID ON - OCPP selected

  1. Set the OCPP URL to ws://ocpp.plugchoice.com.

ANYOS ID OCPP and URL OCPP fields with the serial and Plugchoice endpoint

  1. Set the OCPP ID to the charger's serial number.

  2. Save the configuration.

Registering your charger in Plugchoice

  1. Create a location

  2. Add the charger using the chargepoint ID. For Anyos, this is the serial number (case sensitive).

Done! The charger should come online.

Troubleshooting

Did you set everything up correctly, but the charger still remains "Pre-registered"?

  • The chargepoint ID must exactly match the OCPP ID in the portal.

  • Check the charger shows as online in the portal.

  • No portal login? Contact ANYOS support.

Contact support

You can also reach Plugchoice directly: chat with us in the app, or email [email protected].

For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.

Related Articles
Did this answer your question?