Requirements
An Injet Eco (AC) charger and an internet connection (Wi-Fi or 4G)
The sticker on the side of the charger (contains the login password)
A phone or laptop to access the charger's web interface
Connect your charger
Open the web interface
Power up the charger.
On your phone, open your Wi-Fi settings.
Connect to the network starting with EVSE.
Open a browser and go to 192.168.4.1
Log in with the last 8 characters of the code on the side sticker.
When prompted, set a new password and log in again.
Enter the settings
Open the General tab.
In the SN field, enter the charger's serial number.
Set up your internet connection in the WLAN or 4G tab.
Open the OCPP tab.
Set OCPP Version to OCPP 1.6.
In OCPP Server URL, enter: ws://proxy.plugchoice.com/v1
Press Save.
The charger now connects to Plugchoice. Not connected after a minute? Restart the charger.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For Injet, this is the SN you entered, so the serial number (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The chargepoint ID in Plugchoice must exactly match the SN on the charger.
Check the URL for typos and trailing spaces.
Check the charger has internet via the WLAN or 4G tab.
Restart the charger after changing settings.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.