Skip to main content

How to connect: Fronius

Connect a Fronius Wattpilot to Plugchoice via OCPP using the Solar.wattpilot app.

Requirements


Connect your charger

In the Solar.wattpilot app:

  1. Open your Wattpilot in the app.

  2. Open the Internet tab.

  1. Tap OCPP.

  2. Turn on OCPP 1.6J.

  3. Set Protocol to WS.

  4. Set Host to ocpp.plugchoice.com

  5. Leave Path empty

  1. Tap Save.

The charger now connects to Plugchoice. This can take a few minutes.


Registering your charger in Plugchoice

  1. Select Add charger in the Plugchoice app or web portal and pick your charger's brand. If the app asks how you want to set it up, choose By hand.

  2. Enter the chargepoint ID. For Fronius, this is the serial number (case sensitive).

The app then shows the backend URL and the chargepoint ID once more, and waits until the charger comes online.

We recommend the encrypted address wss://ocpp.plugchoice.com (port 443) if your charger supports it. ws:// is not encrypted, and using it is your own choice. More in How to connect your charger to Plugchoice.


Troubleshooting

Did you set everything up correctly, but the charger still shows "Not connected yet"?

  • The chargepoint ID in Plugchoice must exactly match the serial number.

  • Don't see OCPP in the app? Update the Wattpilot firmware.

  • Check Protocol is WS, not WSS.

  • Check the host and path for typos, spaces, or a trailing slash.

  • Restart the charger after saving.

Contact support

Office

Web form

Phone

Email

Hours

General

+319003766487

NL Solar Energy technical support (installers)

+319003766487

Wattpilot end-user support (Solar Energy)

Solar.SOS installer service portal

Fronius HQ (corporate / general)

+4372422410

Did a company set up your charger for you? Ask them first. You can also reach Plugchoice: chat with us in the app, or email [email protected].

For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.

Did this answer your question?