Adding and managing chargers starts with a location.
The following is set per location:
Chargers
Members and access
Meters
Cards
Smart charging settings
Creating locations
Start by creating a location. Enter the real address: smart charging and the map use it. The location name is for your own reference; you can use your project number, for example.
App
App
Go to Overview > gear icon (Location settings) > Create a new location and choose Set up a new charger.
You enter the address and add the charger in Plugchoice Link. You are then asked to connect a meter, with the main fuse, or to go on without one. Power management uses this.
Web portal
Web portal
After you have created the location, open its Energy tab and choose Power management to prepare the location for power management.
After creating a location you can:
Add chargers to the location
Set up power management
Editing location information
You can change the name and address of a location later, for example when the chargers move to another address or your project number changes.
App
App
Go to Overview > gear icon (Location settings) > Location information. Change the fields and press Save.
Web portal
Web portal
Open the location and press the pencil icon at the top (Edit location). Only the owner can do this.
Changes are visible to all members of the location at once.
Deleting locations
Only the owner can delete a location. Remove all chargers from the location first. You cannot undo deleting a location.
App
App
Go to Overview > gear icon (Location settings) > Delete location. You remove a charger under Chargers > (charger) > Settings > Remove from location.
Web portal
Web portal
Go to Locations, open the menu (...) next to the location and choose Delete. Type the location reference to confirm.