Requirements
Internet connection for the charger
The Daze configuration app and a phone with Bluetooth on
The charger ID (serial number)
This guide applies to the Home, Urban, Share and Duo.
Connect your charger
Open the Daze configuration app.
Press Add Network and fill in the network details.
Press Add Charger and add your charger.
Go to Configurations > OCPP configuration.
Switch on the OCPP activation.
Enter the URL
ws://proxy.plugchoice.com/v1and press Save.Enter the charger ID and press Save.
Registering your charger in Plugchoice
Add the charger using the chargepoint ID. For Daze, this is the charger ID you entered in the app (case sensitive).
Done! The charger should come online.
Troubleshooting
Did you set everything up correctly, but the charger still remains "Pre-registered"?
The chargepoint ID must exactly match the charger ID in the app.
Check the OCPP activation is switched on.
Keep Bluetooth on during the whole configuration.
For a complete guide, see our troubleshooting article if your charger can't connect to Plugchoice.